deep groove ball bearings

Contact Now

Deep groove ball bearings are the most widely used roller bearing type in the world due to their versatility and overall performance. They are characterized by having deep raceway grooves in which the inner and outer rings have circular arcs of slightly larger radius than that of the balls. They also have non-separable rings. Their straight forward basic design has many advantanges:Excellent for high speedsGood radial load capacityAcceptable axial load capacity in both direction.Have low torque capacity at startup and running speeds.Can operate with low noise.Require little maintenance

As flexible as the performance is, the configurations of single row ball bearnigs is also as versatile. These bearings often have steel shields or rubber seals installed on one or both sides and are pre-lubricated with grease. Also, snap rings are sometimes used on the outside edge. While many different retainers are available, pressed steel cages are most commonly used. Even tapered bores are available upon special order.

28,575 mm x 71,438 mm x 20,638 mm Fersa RMS9-2RS deep groove ball bearings

260 mm 195 mm
76.2 mm UC315-48G2T20

12 mm x 28 mm x 8 mm Fersa 6001-2RS deep groove ball bearings

3 mm 177 kN
360 mm 343 mm

25 mm x 62,02 mm x 17,5 mm Fersa F18018 deep groove ball bearings

11.2 kN 13 mm
3.7 Nm 38.1 mm

76,2 mm x 177,8 mm x 39,69 mm SIGMA MJ 3 deep groove ball bearings

120 °C 71.5 mm
64 mm 120 mm

127 mm x 228,6 mm x 34,93 mm SIGMA LJ 5 deep groove ball bearings

SPECIAL DUTY 4 Bolt Flange
3.9375 in SPECIAL DUTY
1/75