deep groove ball bearings

Deep groove ball bearings are the most widely used roller bearing type in the world due to their versatility and overall performance. They are characterized by having deep raceway grooves in which the inner and outer rings have circular arcs of slightly larger radius than that of the balls. They also have non-separable rings. Their straight forward basic design has many advantanges:Excellent for high speedsGood radial load capacityAcceptable axial load capacity in both direction.Have low torque capacity at startup and running speeds.Can operate with low noise.Require little maintenance

As flexible as the performance is, the configurations of single row ball bearnigs is also as versatile. These bearings often have steel shields or rubber seals installed on one or both sides and are pre-lubricated with grease. Also, snap rings are sometimes used on the outside edge. While many different retainers are available, pressed steel cages are most commonly used. Even tapered bores are available upon special order.

Bearing Number	Bore Dia	Outer DIa	Width	Size
75 mm x 95 mm x 10 mm ISB 61815-2RZ deep groove ball bearings	2 Seals	31 mm	60MM Bore; 130MM Out	NTN
9 mm x 24 mm x 7 mm ISB 609 deep groove ball bearings	-40 °C	Bearing	Inner Ring - Both Si	Cylindrical Roller B
9 mm x 20 mm x 6 mm ISB 699ZZ deep groove ball bearings	1.575 Inch \| 40 Mill	No	2 Seals	Deep Groove \| Rubber
850 mm x 1030 mm x 82 mm ISB 618/850 MA deep groove ball bearings	0.28 kg	0.88 kN	11.16 Hz	1 mm
170 mm x 215 mm x 22 mm ISB 61834 deep groove ball bearings	Single Lip	Std Retainer	Round	Rubberized
35 mm x 80 mm x 21 mm ISB 6307-2RS deep groove ball bearings	-20 °C	61 mm	4.11 kg	8 Nm
60 mm x 95 mm x 11 mm ISB 16012 deep groove ball bearings	25.7 kN	8 Nm	92 mm	-20 °C
50 mm x 80 mm x 23 mm ISB 63010-2RS deep groove ball bearings	Mobilith SHC PM 220	Quad Lip	17.86 LB	Steel
800 mm x 980 mm x 57 mm ISB 608/800 deep groove ball bearings	6.65 kN	63.7 mm	3.7 Nm	32 mm
25 mm x 32 mm x 4 mm ISB F6705 deep groove ball bearings	60 mm	0.41 Hz	5.33 Hz	-25 °C
20 mm x 37 mm x 9 mm ISB F6904 deep groove ball bearings	22 mm	36 kN	14.3	5.92 Hz
7 mm x 22 mm x 7 mm ISB 627-Z deep groove ball bearings	-20 °C	4.78 kN	10 mm	9 mm