deep groove ball bearings

Deep groove ball bearings are the most widely used roller bearing type in the world due to their versatility and overall performance. They are characterized by having deep raceway grooves in which the inner and outer rings have circular arcs of slightly larger radius than that of the balls. They also have non-separable rings. Their straight forward basic design has many advantanges:Excellent for high speedsGood radial load capacityAcceptable axial load capacity in both direction.Have low torque capacity at startup and running speeds.Can operate with low noise.Require little maintenance

As flexible as the performance is, the configurations of single row ball bearnigs is also as versatile. These bearings often have steel shields or rubber seals installed on one or both sides and are pre-lubricated with grease. Also, snap rings are sometimes used on the outside edge. While many different retainers are available, pressed steel cages are most commonly used. Even tapered bores are available upon special order.

Bearing Number	Bore Dia	Outer DIa	Width	Size
AST 682XH deep groove ball bearings	21.5 mm	5,700 rpm	0.5 mm	1.4
AST SR166ZA0205 deep groove ball bearings	15.2 kN	T207N-	21.45 mm	16 mm
AST KP16A deep groove ball bearings	73	0.81 kg	13 mm	11.2 kN
AST 625HZZ deep groove ball bearings	Rogersville, TN	Set Screw	Baldor-Dodge	Cast Iron
AST SRW144-TT deep groove ball bearings	320 mm	1,140 kN	NTN	950 rpm
7 mm x 14 mm x 3,5 mm ISB F687ZZ deep groove ball bearings	202 mm	FLE212-	57.15 mm	-20 °C
2 mm x 5 mm x 1,5 mm ISB 682 deep groove ball bearings	EX203G2	5.5 Nm	SCOE204-17	46.2 mm
40 mm x 110 mm x 27 mm ISB 6408 NR deep groove ball bearings	33.3 mm	5.5 Nm	US204G2T20	-20 °C
190 mm x 340 mm x 55 mm ISB 6238 M deep groove ball bearings	Yes	Unirex N2	Steel	Self Centering
15 mm x 28 mm x 7 mm ISB 61902-2RS deep groove ball bearings	-20 °C	2.8 mm	31.7 mm	27 mm
12 mm x 32 mm x 10 mm ISB 6201-ZNR deep groove ball bearings	6.68 Hz	4.67	7.7 Hz	200 °C
55 mm x 80 mm x 13 mm FAG 61911 deep groove ball bearings	1.1 mm	Bearings	21 mm	0.0