- NTN BEARING USA CORP.
- angular contact ball bearings bearing units complex bearings
English
Home>Products>angular contact ball bearings>95 mm x 130 mm x 18 mm FAG B71919-C-T-P4S angular contact ball bearings
95 mm x 130 mm x 18 mm FAG B71919-C-T-P4S angular contact ball bearings
category
angular contact ball bearings
FAG B71919-C-T-P4S Bearing SPECIFICATIONS
100% NTN BEARING USA CORP. Authentic. 95 mm x 130 mm x 18 mm 95 mm x 130 mm x 18 mm FAG B71919-C-T-P4S angular contact ball bearings Highest 400 N·m Cap bolt recommended tightening torque Quality. Certified Supplier.
- FAG
B71919-C-T-P4S
- 27.4 kN
- 419.1 mm
- 400 N·m
- 1350 r/min
- 187.325 mm
- 1/2 NPT
- 53.975 mm
- 30.163 mm
-
NTN BEARING USA CORP.2020-07-10 09:46:19
Welcome to my shop! Glad to serve you! Please send your question!
95 mm x 130 mm x 18 mm FAG B71919-C-T-P4S angular contact ball bearingsTechnical information
- 27.4 kN
- 419.1 mm
- 400 N·m
- 1350 r/min
- 187.325 mm
- 1/2 NPT
- 53.975 mm
- 30.163 mm
- 72.5 kN
- 2 x LOR 114
- 95 mm x 130 mm x 18 mm
FAG B71919-C-T-P4S 95 mm x 130 mm x 18 mm FAG B71919-C-T-P4S angular contact ball bearingsCross reference
FAG B71919-C-T-P4S bearing Size Chart (mm/inches) | |
|---|---|
| Bearing number | NU 1036 M |
| Size (mm) | 280x180x46 |
| Bore Diameter (mm) | 280 |
| Outer Diameter (mm) | 180 |
| Width (mm) | 46 |
| d | 180 mm |
| D | 280 mm |
| B | 46 mm |
| D1 | 245.05 mm |
| F | 205 mm |
| r1,2 - min. | 2.1 mm |
| r3,4 - min. | 2.1 mm |
| s | 6.1 mm |
| da - min. | 190 mm |
| da - max. | 202 mm |
| db - min. | 208 mm |
| Da - max. | 270 mm |
| ra - max. | 2 mm |
| rb - max. | 2 mm |
| Basic dynamic load rating - C | 336 kN |
| Basic static load rating - C0 | 475 kN |
| Fatigue load limit - Pu | 51 kN |
| Reference speed | 2600 r/min |
| Limiting speed | 2600 r/min |
| Calculation factor - kr | 0.1 |
| D1 ≈ | 245.05 mm |
| r1,2 min. | 2.1 mm |
| r3,4 min. | 2.1 mm |
| s max. | 6.1 mm |
| da min. | 190 mm |
| da max. | 202 mm |
| db min. | 208 mm |
| Da max. | 270 mm |
| ra max. | 2 mm |
| rb max. | 2 mm |
| Basic dynamic load rating C | 336 kN |
| Basic static load rating C0 | 475 kN |
| Fatigue load limit Pu | 51 kN |
| Calculation factor kr | 0.1 |
| Limiting value e | 0.2 |
| Axial load factor Y | 0.6 |
| Mass bearing | 10.2 kg |
FAG B71919-C-T-P4S INTERCHANGE
angular contact ball bearings Part series B71919-C-T-P4S is a potential replacement for these common bearing part numbers:
B71919-C-T-P4S
B71919-C-T-P4S
B71919-C-T-P4S
B71919-C-T-P4S
B71919-C-T-P4S
B71919-C-T-P4S
B71919-C-T-P4S
B71919-C-T-P4S
Contact Us
- NTN BEARING USA CORP.
- Address1600 E. Bishop Court, P.O. Box 7604,Mount Prospect, IL 60056-7604, U.S.A.
- Phone(Working Time)298-5287
- Fax
FAG B71919-C-T-P4S Technical Articles
| Are ABEC 1 bearings good? |
| Are SKF bearings made in USA? |
| Can you use all purpose grease on wheel bearings? |
angular contact ball bearings CATEGORIES
- angular contact ball bearings
- bearing units
- complex bearings
- cylindrical roller bearings
- deep groove ball bearings
- linear bearings
- needle roller bearings
- plain bearings
- self aligning ball bearings
- spherical roller bearings
- tapered roller bearings
- thrust ball bearings
- thrust roller bearings
- wheel bearings
- SKF Bearing
- NTN 6211 Bearing
- NTN 6300 Bearing
- NTN Uc207 Bearing
- Ucp213d1 Bearing
Customers Who Viewed FAG B71919-C-T-P4S Bearing Also Viewed
SKF 6200 Bearing
40 mm x 80 mm x 36 mm Fersa F16090 angular contact ball bearings
38,1 mm x 82,55 mm x 19,05 mm SIGMA LJT 1.1/2 angular contact ball bearings
38,1 mm x 95,25 mm x 23,81 mm SIGMA QJM 1.1/2 angular contact ball bearings
34,925 mm x 88,9 mm x 22,23 mm SIGMA MJT 1.3/8 angular contact ball bearings